Same Size Parts for Mono Replacement Single Screw Pump Spare Parts Stator Rotor Spare and Accessory Parts

• Type: Spare and Accessory Parts
• Material: Cast Steel,SS304,SS316,Stainless Steel
• Stator Material: NBR,FPM,EPDM, Food Grade Rubber
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Single Screw Pump
• Number of Stages: One, Two, Multistage
• Pressure: 0-5MPa
• Inlet / Outlet: 20-500mm
• Speed: 50-1500rpm
• Viscosity: 1-1000000cst
• Voltage: 380V or as Require
• Frequency: 50Hz,60Hz
• Max Temperature: 150ºC
• Mono Screw Pump: Cast Iron, Stainless Steel
• Mini Helical Single Screw Pump: Feed Screw Pump
• Hopper Mono Screw Pump: Open Hopper Pump, Large Opening Feed Screw Pump, C
• Transport Package: Angle Steel Frame Supports Seaworthy Wooden Case
• Specification: 0.1-500m3/h
• Trademark: yuanhan
• Origin: China
• HS Code: 8413604090
• Production Capacity: 10000set/Year
• Package Size: 100.00cm * 100.00cm * 100.00cm
• Package Gross Weight: 100.000kg

Product Description

Product Description

Spare parts Product name	1. Suction casing 2. Discharge casing 3.Stator 4. Rotor 5. Rotating Parts 6. Stuffing Box Unit
Reverse-engineering	FARO 3D Laser Scanning, Laser Alignment, Design model, Computational Fluid Dynamics CFD
Material	ASTM, ANSI, SAE, UNS, DIN, EN, ISO, TOCT Cast iron / Cast steel WCB / SS304 / SS316 , Ni-Cr-Mo-Ti  Steel SBBPF, EPBPF, VI, CB, PTFE, EH, VN
Mould and Casting	Investment casting mould, Sand casting mould Investment Casting: Wax injection, Clusters assembly, Coating & Sanding, Dewaxing, Casting, Post cleaning, Heat treatment, Inspection
Process	CNC machining, Auto lathe machining, Meter lathe machining, Wire cutting, EDM cutting, Gringding, Milling, Drilling, Screwing, Cutting, Stamping
Surface treatment	Blacking, Polishing, Anodize, Chrome plating, Zinc plating, Nickel plating or other as requirements
Inspection	Material certificate, Hydrostatic testing, Impeller static & dynamic balancing testing, Non-destructive testing(PT/ RT/ UT/ MT), 3D coordinator, Hardness tester, Roughness tester
Certificate	ISO9001:2015, ISO14001:2004
Packing	1. Small part, single packed then put into paper carton 2. Wooden crates suitable for shipping on the sea 3. We also consider customers' special needs for packing
Delivery	30 days after receiving the deposit.
Payment	70%TT in advance and the balance is paid against the copy of B/L.
Mode of transport	1. Express   2. Sea freight   3. Air shipping   4. Land transport   5. Post

 Parts model :

28A/B:Seal cover	29AB:Connect rod pin	22A:Stator
75A/B:Shaft sleeve	P405/406:Strapping tape	25A:Rotor
P403/404:Spring ring	P401/402:0-ring	26A:Connecting rod
31A/B:Long shaft sleeve	30A/B:Short shaft sleeve	32A:Driving shaft

Short lead				Long Lead
Stage 1	Stage 2	Stage 4		Stage 1
C12A	C012	C014		C12K
C13A	C12B	C14D		C13K
C1XA	C13B	C15D		C1XK
C14A	C1KB	C16D		C14K
C15A	C14B	C17D		C15K
C16A	C15B	C18D		C16K
C17A	C16B	C19D		C17K
C18A	C17B	C1AD		C18K
C19A	C18B			C19K
C1AA	C19B			C1AK
	C1AB

This is not all models, subject to the actual order.
Parts Photoes:

Equipment Display:

 

Packaging & Shipping:

FAQ: